It works.
It flys better.
I remain disappointed with my CX3; it continues to degrade over time, without crashes to blame.
I think the gyro is a basket case. If you leave it hanging loose (as shipped), it provides spurious inputs during helicopter movement, often resulting in oscillations. It you tighten it down, it vibrates the tail badly. If you gain it down enough to eliminate vibrations and oscillations, the nose consistently drifts.
The setup is best left as sold, which presents a constant variety of annoying but limited vibrations, oscillations, and nose drift. If you try to correct any one of them, another vice just becomes more dominant.
Additionally, aileron and elevator controls are becoming increasingly coupled, seemingly without explanation.
I'm downgrading the CX3 to AVOID.
Saturday, December 17, 2011
Z8RC Open Discussion
Feedback | Suggestions | Questions
Please note, reader comments do not appear immediately after hitting submit.
Please note, reader comments do not appear immediately after hitting submit.
I like to fly:
Top 10 This Week
-
The E-flight UMX Extra 300 is a very lightweight half foam/half mylar offering in the indoor 3D arena (or to a much lesser extent and no win...
-
I'm guessing that I'm not atypical, in that, after a few decade hiatus from the hobby, I made a dumb mistake a few years ago. Simpl...
-
Chris wrote... The F4U is too small and light for my CG tool from Great Planes. Where should the CG be based on your experience and how ...
-
Update: Also see: Fixing the Flyzone Fokker Dr.1 Micro Update: After all that was discussed below, the little Fokker's motor shaft r...
-
The "Monster" is in the house ...let the next round of flight testing begin. You know your Yak is a monster when... Its four ...
-
Horizon Hobby seems to want to make it easy for people writing anything resembling honest, upfront RC recommendations. I guess that means ...
-
This area is for feedback, suggestions, or questions about any topic...
-
After being asked about why the Parkzone UM P-51 made it onto my "Avoid" list, I decided to post this "catch-up" mini-re...
-
7/6/2011 - 3:00PM Street prices include shipping Art-Tech Yak 54 (37") Highlights : You can't have much more fun for the mone...
-
Banana Hobby's Nano F4U Corsair in front of Parkzone's UM F4U (aka Jiggy) $69 PNP Manufacturers Spec: - Foam: EPO - Wingspan:...
Top 10 This Month
-
Update: Also see: Fixing the Flyzone Fokker Dr.1 Micro Update: After all that was discussed below, the little Fokker's motor shaft r...
-
This area is for feedback, suggestions, or questions about any topic...
-
This multi-engine set up runs as smooth and strong as I'd hoped. ST .30 The trick to getting the multi-engine setup to run is to u...
-
Update 3: See also: http://z8rc.blogspot.com/2012/01/blade-mcp-x-100-tail-blow-out-fix.html Update 2: mCP X with Z8RC truss upgraded to A...
-
Update: Out of curiosity I swapped out the Super Tigre for a Power 10. Results: little T:W difference and very nose heavy. Recommend an S...
-
BlitzRCWorks G4 Quad Charger / Thunder T6 Multi Charger Update: My Common Sense RC 250W PSU has two sets of outputs (see photo below). ...
-
Update: Coming Soon - AS3X Head-to-Head comparison. Yes, I admit it, I knew from the start that my easy-hovering gyro-enhanced Cessna 150...
-
INTRO A new line of Ultra Micro aircraft has hit the str...
-
Addendum: As a result of my review, Horizon lowered the price of the UMX Beast to $99, earning it a B+ Z8RC overall rating. Horizon deserv...
-
QUICK TAKE The DX18 is the latest evolution of Spektrum's DSM2/X product line. After researching the level of change delivered by ...
Z8RC Resources
A Practical RC Simulator Comparison
AMA Under the Microscope (& Part 2)
Balancing a ducted fan or prop perfectly
Balsa or Foam?
Blade mCP X 100% Vibration Fix
Choosing the Right Motor
FAA Guarantees Your Right to Fly RC in the USA
Fixing those broken UM wheel pants
How to Land from The Overhead Pattern
Online RC Discount Codes
Soft Throttle
Understanding CG
Z8RC Thrust-to-Weight Ratio Database
Z8RC Manufacturer Rankings